主机和服务的Nagios通知

1 回答

• 0

  在服务定义中，您需要设置contact_groups（并在其他地方定义组） . 这是一个例子：

  define service{
      name                            A-service ; The 'name' of this service template
      active_checks_enabled           1       ; Active service checks are enabled
      passive_checks_enabled          1       ; Passive service checks are enabled/accepted
      parallelize_check               1       ; Active service checks should be parallelized
      obsess_over_service             1       ; We should obsess over this service (if necessary)
      check_freshness                 0       ; Default is to NOT check service 'freshness'
      notifications_enabled           1       ; Service notifications are enabled
      event_handler_enabled           1       ; Service event handler is enabled
      flap_detection_enabled          1       ; Flap detection is enabled
      failure_prediction_enabled      1       ; Failure prediction is enabled
      process_perf_data               1       ; Process performance data
      retain_status_information       1       ; Retain status information across program restarts
      retain_nonstatus_information    1       ; Retain non-status information across program restarts
      notification_interval           0       ; Only send notifications on status$
      is_volatile                     0
      check_period                    24x7
      normal_check_interval           5
      retry_check_interval            1
      max_check_attempts              4
      notification_period             24x7
      notification_options            w,u,c,r
      contact_groups                  A_only  ; >>>Here's the magic you need<<<
      register                        0       ; DONT REGISTER THIS DEFINITION - ITS NOT A REAL SE$
  }
  # for contact config file
  define contactgroup{
      contactgroup_name       A_only
      alias                   APeople
      members                 APerson1, APerson2
  }
  

  对于B组，将A_only更改为B_only并创建一个新的联系人组 .

  回复于 2024-05-06T11:49:28+08:00