我正在使用基于NUCLEO-F207ZG板和stm32f207ZGT的继承项目，作为IDE我使用SW4STM32（Eclipse，AC6） .
这个项目在其他电脑上编译正常，但由于距离原因，我不能用它来比较配置 .
导入后没有错误我尝试编译它得到控制台输出：
构建目标：STM32F207ZG_NUCLEO_144.elf调用：MCU GCC链接器arm-none-eabi-gcc -mcpu = cortex-m3 -mthumb -mfloat-abi = soft -specs = nosys.specs -specs = nano.specs -T“.. /STM32F207ZGTx_FLASH.ld“-Wl，-Map = output.map -Wl， - gc-sections -o”STM32F207ZG_NUCLEO_144.elf“@”objects.list“-lm c：/ac6/systemworkbench/plugins/fr.ac6 . mcu.externaltools.arm-none.win32_1.15.0.201708311556 /工具/编译器/斌/../ lib中/ GCC / ARM-NONE-EABI / 6.3.1 /../../../../手臂-none-eabi / bin / ld.exe：section .RxDescripSection VMA [2000e000,2000e09f]重叠部分.bss VMA [20000118,2001431b] collect2.exe：错误：ld返回1退出状态make：*** [STM32F207ZG_NUCLEO_144.elf ]错误1 makefile：45：目标'STM32F207ZG_NUCLEO_144.elf'的配方失败15:59:47构建完成（耗时23s.436ms）
在互联网上进行一些搜索后，这似乎是由链接器引起的：
/*
*****************************************************************************
**
** File : LinkerScript.ld
**
** Abstract : Linker script for STM32F207ZGTx Device with
** 1024KByte FLASH, 128KByte RAM
**
** Set heap size, stack size and stack location according
** to application requirements.
**
** Set memory bank area and size if external memory is used.
**
** Target : STMicroelectronics STM32
**
**
** Distribution: The file is distributed as is, without any warranty
** of any kind.
**
** (c)Copyright Ac6.
** You may use this file as-is or modify it according to the needs of your
** project. Distribution of this file (unmodified or modified) is not
** permitted. Ac6 permit registered System Workbench for MCU users the
** rights to distribute the assembled, compiled & linked contents of this
** file as part of an application binary file, provided that it is built
** using the System Workbench for MCU toolchain.
**
*****************************************************************************
*/
/* Entry Point */
ENTRY(Reset_Handler)
/* Highest address of the user mode stack */
_estack = 0x20020000; /* end of RAM */
/* Generate a link error if heap and stack don't fit into RAM */
_Min_Heap_Size = 0x200; /* required amount of heap */
_Min_Stack_Size = 0x400; /* required amount of stack */
/* Specify the memory areas */
MEMORY
{
FLASH (rx) : ORIGIN = 0x8000000, LENGTH = 1024K
RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 128K
}
/* Define output sections */
SECTIONS
{
/* The startup code goes first into FLASH */
.isr_vector :
{
. = ALIGN(4);
KEEP(*(.isr_vector)) /* Startup code */
. = ALIGN(4);
} >FLASH
/* The program code and other data goes into FLASH */
.text :
{
. = ALIGN(4);
*(.text) /* .text sections (code) */
*(.text*) /* .text* sections (code) */
*(.glue_7) /* glue arm to thumb code */
*(.glue_7t) /* glue thumb to arm code */
*(.eh_frame)
KEEP (*(.init))
KEEP (*(.fini))
. = ALIGN(4);
_etext = .; /* define a global symbols at end of code */
} >FLASH
/* Constant data goes into FLASH */
.rodata :
{
. = ALIGN(4);
*(.rodata) /* .rodata sections (constants, strings, etc.) */
*(.rodata*) /* .rodata* sections (constants, strings, etc.) */
. = ALIGN(4);
} >FLASH
.ARM.extab : { *(.ARM.extab* .gnu.linkonce.armextab.*) } >FLASH
.ARM : {
__exidx_start = .;
*(.ARM.exidx*)
__exidx_end = .;
} >FLASH
.preinit_array :
{
PROVIDE_HIDDEN (__preinit_array_start = .);
KEEP (*(.preinit_array*))
PROVIDE_HIDDEN (__preinit_array_end = .);
} >FLASH
.init_array :
{
PROVIDE_HIDDEN (__init_array_start = .);
KEEP (*(SORT(.init_array.*)))
KEEP (*(.init_array*))
PROVIDE_HIDDEN (__init_array_end = .);
} >FLASH
.fini_array :
{
PROVIDE_HIDDEN (__fini_array_start = .);
KEEP (*(SORT(.fini_array.*)))
KEEP (*(.fini_array*))
PROVIDE_HIDDEN (__fini_array_end = .);
} >FLASH
/* used by the startup to initialize data */
_sidata = LOADADDR(.data);
/* Initialized data sections goes into RAM, load LMA copy after code */
.data :
{
. = ALIGN(4);
_sdata = .; /* create a global symbol at data start */
*(.data) /* .data sections */
*(.data*) /* .data* sections */
. = ALIGN(4);
_edata = .; /* define a global symbol at data end */
} >RAM AT> FLASH
/* Uninitialized data section */
. = ALIGN(4);
.bss :
{
/* This is used by the startup in order to initialize the .bss secion */
_sbss = .; /* define a global symbol at bss start */
__bss_start__ = _sbss;
*(.bss)
*(.bss*)
*(COMMON)
. = ALIGN(4);
_ebss = .; /* define a global symbol at bss end */
__bss_end__ = _ebss;
} >RAM
/* User_heap_stack section, used to check that there is enough RAM left */
._user_heap_stack :
{
. = ALIGN(8);
PROVIDE ( end = . );
PROVIDE ( _end = . );
. = . + _Min_Heap_Size;
. = . + _Min_Stack_Size;
. = ALIGN(8);
} >RAM
/* Remove information from the standard libraries */
/DISCARD/ :
{
libc.a ( * )
libm.a ( * )
libgcc.a ( * )
}
.ARM.attributes 0 : { *(.ARM.attributes) }
.RxDescripSection 0x2000E000 (NOLOAD) : { *(.RxDescripSection) } >RAM
.TxDescripSection 0x2000E100 (NOLOAD) : { *(.TxDescripSection) } >RAM
.RxBUF 0x2000E200 (NOLOAD) : { *(.RxBUF) } >RAM
.TxBUF 0x2000FFC4 (NOLOAD) : { *(.TxBUF) } >RAM
}
Makefile文件：
################################################################################
# Automatically-generated file. Do not edit!
################################################################################
-include ../makefile.init
RM := rm -rf
# All of the sources participating in the build are defined here
-include sources.mk
-include Middlewares/LwIP/system/OS/subdir.mk
-include Middlewares/LwIP/Netif/subdir.mk
-include Middlewares/LwIP/Core/IPv4/subdir.mk
-include Middlewares/LwIP/Core/subdir.mk
-include Middlewares/LwIP/Api/subdir.mk
-include Middlewares/FreeRTOS/portable/ARM_CM3/subdir.mk
-include Middlewares/FreeRTOS/portable/subdir.mk
-include Middlewares/FreeRTOS/subdir.mk
-include Drivers/STM32F2xx_HAL_Driver/subdir.mk
-include Drivers/BSP/STM32F2xx_Nucleo_144/subdir.mk
-include Application/User/Src/MQTTPacket/subdir.mk
-include Application/User/Src/MQTTClient/subdir.mk
-include Application/User/Src/subdir.mk
-include subdir.mk
-include objects.mk
ifneq ($(MAKECMDGOALS),clean)
ifneq ($(strip $(S_UPPER_DEPS)),)
-include $(S_UPPER_DEPS)
endif
ifneq ($(strip $(C_DEPS)),)
-include $(C_DEPS)
endif
endif
-include ../makefile.defs
# Add inputs and outputs from these tool invocations to the build variables
# All Target
all: STM32F207ZG_NUCLEO_144.elf
# Tool invocations
STM32F207ZG_NUCLEO_144.elf: $(OBJS) $(USER_OBJS) ../STM32F207ZGTx_FLASH.ld
@echo 'Building target: $@'
@echo 'Invoking: MCU GCC Linker'
arm-none-eabi-gcc -mcpu=cortex-m3 -mthumb -mfloat-abi=soft -specs=nosys.specs -specs=nano.specs -T"../STM32F207ZGTx_FLASH.ld" -Wl,-Map=output.map -Wl,--gc-sections -o "STM32F207ZG_NUCLEO_144.elf" @"objects.list" $(USER_OBJS) $(LIBS) -lm
@echo 'Finished building target: $@'
@echo ' '
$(MAKE) --no-print-directory post-build
# Other Targets
clean:
-$(RM) *
-@echo ' '
post-build:
-@echo 'Generating binary and Printing size information:'
arm-none-eabi-objcopy -O binary "STM32F207ZG_NUCLEO_144.elf" "STM32F207ZG_NUCLEO_144.bin"
arm-none-eabi-size "STM32F207ZG_NUCLEO_144.elf"
-@echo ' '
.PHONY: all clean dependents
.SECONDARY: post-build
-include ../makefile.targets
我没有想法，我已经尝试手动修改链接器和makefile，但它最糟糕 .
谢谢你的帮助！！
EDIT:
如果我删除（注释）链接器的最后几行，那么它可以正常工作，但我不能这样做，因为这是一个自动生成的文件 .
链接器中的修改：
/*
.RxDescripSection 0x2000E000 (NOLOAD) : { *(.RxDescripSection) } >RAM
.TxDescripSection 0x2000E100 (NOLOAD) : { *(.TxDescripSection) } >RAM
.RxBUF 0x2000E200 (NOLOAD) : { *(.RxBUF) } >RAM
.TxBUF 0x2000FFC4 (NOLOAD) : { *(.TxBUF) } >RAM
*/
EDIT 2:
这条线我首先评论 EDIT ，来自 ethernetif.c ，我最确定我需要主题 .
#if defined ( __ICCARM__ ) /*!< IAR Compiler */
#pragma location=0x2000E000
__no_init ETH_DMADescTypeDef DMARxDscrTab[ETH_RXBUFNB];/* Ethernet Rx MA Descriptor */
#pragma location=0x2000E100
__no_init ETH_DMADescTypeDef DMATxDscrTab[ETH_TXBUFNB];/* Ethernet Tx DMA Descriptor */
#elif defined ( __CC_ARM )
ETH_DMADescTypeDef DMARxDscrTab[ETH_RXBUFNB] __attribute__((at(0x2000E000)));/* Ethernet Rx MA Descriptor */
ETH_DMADescTypeDef DMATxDscrTab[ETH_TXBUFNB] __attribute__((at(0x2000E100)));/* Ethernet Tx DMA Descriptor */
#elif defined ( __GNUC__ )
ETH_DMADescTypeDef DMARxDscrTab[ETH_RXBUFNB] __attribute__((section(".RxDescripSection")));/* Ethernet Rx MA Descriptor */
ETH_DMADescTypeDef DMATxDscrTab[ETH_TXBUFNB] __attribute__((section(".TxDescripSection")));/* Ethernet Tx DMA Descriptor */
#endif
#if defined ( __ICCARM__ ) /*!< IAR Compiler */
#pragma location=0x2000E200
__no_init uint8_t Rx_Buff[ETH_RXBUFNB][ETH_RX_BUF_SIZE]; /* Ethernet Receive Buffer */
#pragma location=0x2000FFC4
__no_init uint8_t Tx_Buff[ETH_TXBUFNB][ETH_TX_BUF_SIZE]; /* Ethernet Transmit Buffer */
#elif defined ( __CC_ARM )
uint8_t Rx_Buff[ETH_RXBUFNB][ETH_RX_BUF_SIZE] __attribute__((at(0x2000E200))); /* Ethernet Receive Buffer */
uint8_t Tx_Buff[ETH_TXBUFNB][ETH_TX_BUF_SIZE] __attribute__((at(0x2000FFC4))); /* Ethernet Transmit Buffer */
#elif defined ( __GNUC__ )
uint8_t Rx_Buff[ETH_RXBUFNB][ETH_RX_BUF_SIZE] __attribute__((section(".RxBUF")));/* Ethernet Receive Buffer */
uint8_t Tx_Buff[ETH_TXBUFNB][ETH_TX_BUF_SIZE] __attribute__((section(".TxBUF")));/* Ethernet Transmit Buffer */
#endif
1 回答
我不知道为什么，但现在我有硬件进行测试，该项目没有我在 EDIT 评论的行
编辑：问题是在cubemx生成的LWIP代码中 .