Home Articles

为什么我可以看到LuCI有线而不是无线?

Asked
Viewed 940 times
0

我在我的路由器上安装了OpenWRT,但只有通过局域网连接我的路由器才能看到LuCI,而不是通过无线连接 . 为什么,我怎么能为它配置LuCI?

UPDATE

root@OpenWrt:~# cat /etc/config/firewall 
config defaults
    option syn_flood    1
    option input        ACCEPT
    option output       ACCEPT
    option forward      REJECT
# Uncomment this line to disable ipv6 rules
#   option disable_ipv6 1

config zone
    option name     lan
    option network      'lan'
    option input        ACCEPT
    option output       ACCEPT
    option forward      REJECT

config zone
    option name     wan
    option network      'wan'
    option input        REJECT
    option output       ACCEPT
    option forward      REJECT
    option masq     1
    option mtu_fix      1

config forwarding
    option src      lan
    option dest     wan

# We need to accept udp packets on port 68,
# see https://dev.openwrt.org/ticket/4108
config rule
    option name     Allow-DHCP-Renew
    option src      wan
    option proto        udp
    option dest_port    68
    option target       ACCEPT
    option family       ipv4

# Allow IPv4 ping
config rule
    option name     Allow-Ping
    option src      wan
    option proto        icmp
    option icmp_type    echo-request
    option family       ipv4
    option target       ACCEPT

# Allow DHCPv6 replies
# see https://dev.openwrt.org/ticket/10381
config rule
    option name     Allow-DHCPv6
    option src      wan
    option proto        udp
    option src_ip       fe80::/10
    option src_port     547
    option dest_ip      fe80::/10
    option dest_port    546
    option family       ipv6
    option target       ACCEPT

# Allow essential incoming IPv6 ICMP traffic
config rule
    option name     Allow-ICMPv6-Input
    option src      wan
    option proto    icmp
    list icmp_type      echo-request
    list icmp_type      echo-reply
    list icmp_type      destination-unreachable
    list icmp_type      packet-too-big
    list icmp_type      time-exceeded
    list icmp_type      bad-header
    list icmp_type      unknown-header-type
    list icmp_type      router-solicitation
    list icmp_type      neighbour-solicitation
    list icmp_type      router-advertisement
    list icmp_type      neighbour-advertisement
    option limit        1000/sec
    option family       ipv6
    option target       ACCEPT

# Allow essential forwarded IPv6 ICMP traffic
config rule
    option name     Allow-ICMPv6-Forward
    option src      wan
    option dest     *
    option proto        icmp
    list icmp_type      echo-request
    list icmp_type      echo-reply
    list icmp_type      destination-unreachable
    list icmp_type      packet-too-big
    list icmp_type      time-exceeded
    list icmp_type      bad-header
    list icmp_type      unknown-header-type
    option limit        1000/sec
    option family       ipv6
    option target       ACCEPT

# include a file with users custom iptables rules
config include
    option path /etc/firewall.user


### EXAMPLE CONFIG SECTIONS
# do not allow a specific ip to access wan
#config rule
#   option src      lan
#   option src_ip   192.168.45.2
#   option dest     wan
#   option proto    tcp
#   option target   REJECT

# block a specific mac on wan
#config rule
#   option dest     wan
#   option src_mac  00:11:22:33:44:66
#   option target   REJECT

# block incoming ICMP traffic on a zone
#config rule
#   option src      lan
#   option proto    ICMP
#   option target   DROP

# port redirect port coming in on wan to lan
#config redirect
#   option src          wan
#   option src_dport    80
#   option dest         lan
#   option dest_ip      192.168.16.235
#   option dest_port    80
#   option proto        tcp

# port redirect of remapped ssh port (22001) on wan
#config redirect
#   option src      wan
#   option src_dport    22001
#   option dest     lan
#   option dest_port    22
#   option proto        tcp

# allow IPsec/ESP and ISAKMP passthrough
#config rule
#   option src      wan
#   option dest     lan
#   option protocol     esp
#   option target       ACCEPT

#config rule
#   option src      wan
#   option dest     lan
#   option src_port     500
#   option dest_port    500
#   option proto        udp
#   option target       ACCEPT

### FULL CONFIG SECTIONS
#config rule
#   option src      lan
#   option src_ip   192.168.45.2
#   option src_mac  00:11:22:33:44:55
#   option src_port 80
#   option dest     wan
#   option dest_ip  194.25.2.129
#   option dest_port    120
#   option proto    tcp
#   option target   REJECT

#config redirect
#   option src      lan
#   option src_ip   192.168.45.2
#   option src_mac  00:11:22:33:44:55
#   option src_port     1024
#   option src_dport    80
#   option dest_ip  194.25.2.129
#   option dest_port    120
#   option proto    tcp

1 Answer

  • 0

    我发现问题出在路由器上,它是一个能够分配3G连接的路由器 . 我把它归还给普通的路由器 .

Related