Home Articles

在OpenWRT中将Linux Bridge更改为Openvswitch

Asked
Viewed 1633 times
1

我正在尝试使用openvswitch更改openwrt中的linux bridge,我使用openvswitch包为tp-link tlwr1043nd编译openwrt,它已经完成了...问题是当我删除br-lan(linux brige)并用openvswitch替换它时,它总是错误和砖块

这是我用来更改为ovs的脚本:我用 ((/root/ovs-tplink.sh > /dev/null 2&>1)&)& 运行它,这样可以在后台运行,

#!/bin/sh
OVS_BR=ovslan
#IP Controller, Port for OvS Manager, Linux Bridge
IP_CONTROLLER=192.168.0.100
PORT_CONTROLLER=6633
LINUX_BRIDGE=br-lan
echo -e "\033[0;32m Declare Necessary Variable Successful"
# Add Bridge Open vSwitch
ovs-vsctl --may-exist add-br $OVS_BR
echo -e "\033[0;32m Add OvS Bridge $OVS_BR Succesful"
sleep 2
#Delete Port if added to $LINUX_BRIDGE
for i in eth0.1 eth0.2 eth0.3 eth0.4 eth0.5 eth0.6
do
  brctl delif $LINUX_BRIDGE $i
  echo -e "\033[0;32m Delete Port $i in $LINUX_BRIDGE successful"
  sleep 1
done
# Add Port to Bridge
for i in eth0.1 eth0.2 eth0.3 eth0.4 eth0.5 eth0.6 wlan0
do
  ovs-vsctl --may-exist add-port $OVS_BR $i
  echo -e "\033[0;32m Add OvS Port $i to $OVS_BR successful"
  sleep 1
done
# Up The Interface
for i in eth0.1 eth0.2 eth0.3 eth0.4 eth0.5 eth0.6 wlan0 ovslan
do
  ifconfig $i up
  echo -e "\033[0;32m Up interface $i"
  sleep 1
done
#Set All Options Necessary for Controller
ovs-vsctl set bridge $OVS_BR stp_enable=true
echo -e "\033[0;32m Set STP Enabled True in $OVS_BR Successful"
sleep 1
ovs-vsctl set-controller $OVS_BR tcp:$IP_CONTROLLER:$PORT_CONTROLLER
echo -e "\033[0;32m Set IP:$IP_CONTROLLER as Controller in $OVS_BR and Successful"
sleep 1
ovs-vsctl set-fail-mode $OVS_BR standalone
echo -e "\033[0;32m Set Standalone Mode in $OVS_BR and Successful"
sleep 1
ovs-vsctl set bridge $OVS_BR protocols=OpenFlow13
echo -e "\033[0;32m Set OpenFlow Protocol to 1.3 in $OVS_BR Successful"
sleep 1
ovs-vsctl set-manager ptcp:6640
sleep 1
ovs-ofctl del-flows $OVS_BR
echo -e "\033[0;32m Delete Previous Flows in $OVS_BR and Successful"
sleep 1
echo -e "\033[0;32m Restart Network Service. . . . . . "
/etc/init.d/network restart
echo -e "\033[0;32m Restart Network Service Successful"
# Check Result
echo -e "\033[0;32m Result : "
ovs-vsctl show
echo " "
reboot
exit 0

这是/ etc / config / network中的网络配置:

config interface 'loopback'
    option ifname 'lo'
    option proto 'static'
    option ipaddr '127.0.0.1'
    option netmask '255.0.0.0'

config globals 'globals'
    option ula_prefix 'fded:6c7d:48c4::/48'

config interface 'lan'
    option type 'bridge'
    option ifname 'eth0.1 eth0.2 eth0.3 eth0.4 eth0.5 eth0.6'
    option proto 'static'
    option ipaddr '192.168.0.110'
    option netmask '255.255.255.0'
    option gateway '192.168.0.1'

config interface 'ovslan'
    option ifname 'ovslan'
    option proto 'static'
    option ipaddr '192.168.0.111'
    option netmask '255.255.255.0'
    option gateway '192.168.0.1'

config interface 'eth0_1'
    option ifname 'eth0.1'
    option proto 'static'

config interface 'wan'
    option ifname 'ovs-wan'
    option proto 'dhcp'

config interface 'eth0_2'
    option ifname 'eth0.2'
    option proto 'dhcp'

config interface 'ovs1'
    option proto 'static'
    option ifname 'eth0.3'
    option proto 'dhcp'

config interface 'ovs2'
    option proto 'static'
    option ifname 'eth0.4'
    option proto 'dhcp'

config interface 'ovs3'
    option proto 'static'
    option ifname 'eth0.5'
    option proto 'dhcp'

config interface 'ovs4'
    option proto 'static'
    option ifname 'eth0.6'
    option proto 'dhcp'

config switch
    option name 'switch0'
    option reset '1'
    option enable_vlan '1'

config switch_vlan
    option device 'switch0'
    option vlan '1'
    option ports '0t 6'
    option vid '1'

config switch_vlan
    option device 'switch0'
    option vlan '2'
    option ports '0t 5'
    option vid '2'

config switch_vlan
    option device 'switch0'
    option vlan '3'
    option vid '3'
    option ports '0t 4'

config switch_vlan
    option device 'switch0'
    option vlan '4'
    option vid '4'
    option ports '0t 3'

config switch_vlan
    option device 'switch0'
    option vlan '5'
    option vid '5'
    option ports '0t 2'

config switch_vlan
    option device 'switch0'
    option vlan '6'
    option vid '6'
    option ports '0t 1'

我在使用openvswitch网桥时使用ovslan来提供统计IP,请帮我解决这个问题...

谢谢你的回答...

1 Answer

  • 0

    [已解决]脚本很好,只需通过带有 nanovi /etc/config/network 的ssh手动编辑局域网配置,如下所示:

    config interface 'lan'
        #option type 'bridge' <= delete this
        #option ifname 'eth0.1 eth0.2 eth0.3 eth0.4 eth0.5 eth0.6' <= edit
        option ifname 'ovslan' <= add this
        option proto 'static'
        option ipaddr '192.168.0.110'
        option netmask '255.255.255.0'
        option gateway '192.168.0.1'
    

    然后使用 ((/root/ovs-tplink.sh > /dev/null 2&>1)&)& 运行上面的脚本,等待,然后 check with ovs-vsctl show

    我们:

    • /etc/config/network 的网络配置中添加vlan

    • 禁用我们的防火墙和DHCP服务器,在我们的网络中使用父配置,因为我们使用openvswitch(我们设置了一个转储ap路由器)

    • 删除上面的br-lan(删除 option type 'bridge' ),用你喜欢的ovs桥重命名ifname

    • 运行上面的脚本:

    该脚本基本上告诉:

    • 添加Openvswitch Bridge

    • 删除linux bridge中的端口

    • 将端口添加到openvswitch中

    • 在openvswitch中设置必要的选项

    在这种情况下,我在TP-Link TL-WR1043和v4中使用OpenWRT,我认为在v3或v2中也是如此,谢谢大家,

Related