首页 文章

ERROR 2006（HY000）第1行：MySQL服务器已经消失

提问于
浏览 次
17

ERROR 2006（HY000）第1行：MySQL服务器已经消失

我面临同样的问题 . 我正在尝试将mysqldump文件恢复到我的机器 . 该文件的大小为2.7 MB . 我得到“ERROR 2006（HY000）在第1行：MySQL服务器已经消失”错误 . 我增加了max_allowed_packet和wait_timeout的大小 . 但没有任何效果 .

以下是我的文件（my-medium.ini）的内容，请告诉我我错在哪里 . 我的安装有各种ini文件，我修改过，my-large，my-medium，my-small，my-huge，my-innodb-heavy-4G . 提前致谢！！

# Example MySQL config file for medium systems.
#
# This is for a system with little memory (32M - 64M) where MySQL plays
# an important part, or systems up to 128M where MySQL is used together with
# other programs (such as a web server)
#
# You can copy this file to
# /etc/my.cnf to set global options,
# mysql-data-dir/my.cnf to set server-specific options (in this
# installation this directory is C:\mysql\data) or
# ~/.my.cnf to set user-specific options.
#
# In this file, you can use all long options that a program supports.
# If you want to know which options a program supports, run the program
# with the "--help" option.

# The following options will be passed to all MySQL clients
[client]
#password   = your_password
port        = 3306
socket      = /tmp/mysql.sock

# Here follows entries for some specific programs

# The MySQL server
[mysqld]
port        = 3306
socket      = /tmp/mysql.sock
skip-locking
key_buffer_size = 16M
max_allowed_packet = 512M
table_open_cache = 64
sort_buffer_size = 512K
net_buffer_length = 8K
read_buffer_size = 256K
read_rnd_buffer_size = 512K
myisam_sort_buffer_size = 8M
wait_timeout = 6000

# Don't listen on a TCP/IP port at all. This can be a security enhancement,
# if all processes that need to connect to mysqld run on the same host.
# All interaction with mysqld must be made via Unix sockets or named pipes.
# Note that using this option without enabling named pipes on Windows
# (via the "enable-named-pipe" option) will render mysqld useless!
# 
#skip-networking

# Replication Master Server (default)
# binary logging is required for replication
log-bin=mysql-bin

# binary logging format - mixed recommended
binlog_format=mixed

# required unique id between 1 and 2^32 - 1
# defaults to 1 if master-host is not set
# but will not function as a master if omitted
server-id   = 1

# Replication Slave (comment out master section to use this)
#
# To configure this host as a replication slave, you can choose between
# two methods :
#
# 1) Use the CHANGE MASTER TO command (fully described in our manual) -
#    the syntax is:
#
#    CHANGE MASTER TO MASTER_HOST=<host>, MASTER_PORT=<port>,
#    MASTER_USER=<user>, MASTER_PASSWORD=<password> ;
#
#    where you replace <host>, <user>, <password> by quoted strings and
#    <port> by the master's port number (3306 by default).
#
#    Example:
#
#    CHANGE MASTER TO MASTER_HOST='125.564.12.1', MASTER_PORT=3306,
#    MASTER_USER='joe', MASTER_PASSWORD='secret';
#
# OR
#
# 2) Set the variables below. However, in case you choose this method, then
#    start replication for the first time (even unsuccessfully, for example
#    if you mistyped the password in master-password and the slave fails to
#    connect), the slave will create a master.info file, and any later
#    change in this file to the variables' values below will be ignored and
#    overridden by the content of the master.info file, unless you shutdown
#    the slave server, delete master.info and restart the slaver server.
#    For that reason, you may want to leave the lines below untouched
#    (commented) and instead use CHANGE MASTER TO (see above)
#
# required unique id between 2 and 2^32 - 1
# (and different from the master)
# defaults to 2 if master-host is set
# but will not function as a slave if omitted
#server-id       = 2
#
# The replication master for this slave - required
#master-host     =   <hostname>
#
# The username the slave will use for authentication when connecting
# to the master - required
#master-user     =   <username>
#
# The password the slave will authenticate with when connecting to
# the master - required
#master-password =   <password>
#
# The port the master is listening on.
# optional - defaults to 3306
#master-port     =  <port>
#
# binary logging - not required for slaves, but recommended
#log-bin=mysql-bin

# Point the following paths to different dedicated disks
#tmpdir     = /tmp/     
#log-update     = /path-to-dedicated-directory/hostname

# Uncomment the following if you are using InnoDB tables
#innodb_data_home_dir = C:\mysql\data/
#innodb_data_file_path = ibdata1:10M:autoextend
#innodb_log_group_home_dir = C:\mysql\data/
# You can set .._buffer_pool_size up to 50 - 80 %
# of RAM but beware of setting memory usage too high
#innodb_buffer_pool_size = 16M
#innodb_additional_mem_pool_size = 2M
# Set .._log_file_size to 25 % of buffer pool size
#innodb_log_file_size = 5M
#innodb_log_buffer_size = 8M
#innodb_flush_log_at_trx_commit = 1
#innodb_lock_wait_timeout = 50

[mysqldump]
quick
max_allowed_packet = 512M

[mysql]
no-auto-rehash
# Remove the next comment character if you are not familiar with SQL
#safe-updates

[myisamchk]
key_buffer_size = 20M
sort_buffer_size = 20M
read_buffer = 2M
write_buffer = 2M

[mysqlhotcopy]
interactive-timeout
mysql mysql-python

5 回答

  • 0

    更改my.cnf文件中的3个设置

    在[mysqld]下

    max_allowed_packet = 64M
wait_timeout = 6000

    在[mysqldump]下

    max_allowed_packet = 64M

    那应该解决它

    回复于
  • 0

    这通常意味着你有"incompatibilities with the current version of MySQL Server"，见mysql_upgrade . 我遇到了同样的问题，只需要运行：

    mysql_upgrade --password

    该文档指出，“每次升级MySQL时都应执行mysql_upgrade” .

    回复于
  • 46

    我刚刚发现这个错误正在发生，因为我使用“windows power-shell”而不是命令提示符:)）解决了！

    回复于
  • 0

    在 [mysqld] 下我尝试了以下内容：

    max_allowed_packet = 2096M

    重新启动mysqld并且它不起作用，但是对我来说有用的是从命令行全局设置 max_allowed_packet 然后从转储运行导出，它没有任何问题 .

    您可以从较小的数据包大小开始，具体取决于数据库，我也重新导入了相同大小的数据库 .

    For Export:-

    mysqldump --opt --user=confluenceUser --password='<passwd>' --max_allowed_packet=2147483648 confluencedb | gzip > confluencedb.sql.gz

    For Import:-

    mysql> SET GLOBAL max_allowed_packet=2147483648;

Query OK, 0 rows affected, 1 warning (0.00 sec)

zcat confluence.sql.gz | mysql -uconfluence -p<passwd> confluencedb
    回复于
  • 3

    上面的答案可以提供帮助，只需添加我的建议，因为您可以通过使用source命令导入来绕过限制 . 作为mysql -u username -p database_name <file.sql的替代方法，您可以先登录mysql，选择数据库，然后按源导入，如下所示 .

    mysql -u username -p    
mysql> use db_name;
mysql> source path-to/file.sql;
    回复于

相关问题