首页 文章

WCF错误“对象图中可以序列化或反序列化的最大项目数为'65536'”

提问于
浏览 次
13

我在WCF调用上收到以下错误：

对象图中可序列化或反序列化的最大项数为“65536”

我已经阅读了大量的论坛帖子，其中许多人提到修改app.config和web.config以指定允许更大对象图的新行为 . 我已经这样做了，这就是我在这些文件中所拥有的：

App.Config on the WPF project:

<system.serviceModel>
<behaviors>
  <serviceBehaviors>
    <behavior name="">
      <serviceMetadata httpGetEnabled="false" />
      <serviceDebug includeExceptionDetailInFaults="false" />
    </behavior>
  </serviceBehaviors>
  <endpointBehaviors>
    <behavior name="">
      <dataContractSerializer maxItemsInObjectGraph="2147483646"/>
    </behavior>

  </endpointBehaviors>

</behaviors>

<services>
  <service name="digiPM.Shell.LogOutPMSEMRService.PMSEMRLogOutService">
    <!--<endpoint address="" binding="basicHttpBinding" contract="digiPM.Shell.LogOutPMSEMRService.IPMSEMRLogOutService">
      <identity>
        <dns value="localhost" />
      </identity>
    </endpoint>
    <endpoint address="mex" binding="mexHttpBinding" contract="IMetadataExchange" />
    <host>
      <baseAddresses>
        <add baseAddress="http://localhost:8732/Design_Time_Addresses/digiPM.Shell.LogOutPMSEMRService/PMSEMRLogOutService/" />
      </baseAddresses>
    </host>-->
    <endpoint address="" binding="netTcpBinding" name="NetTcpBindingEndpoint" contract="digiPM.Shell.LogOutPMSEMRService.IPMSEMRLogOutService">
      <identity>
        <dns value="localhost" />
      </identity>
    </endpoint>
    <endpoint address="mex" binding="mexTcpBinding" bindingConfiguration="" name="MexTcpBidingEndpoint" contract="IMetadataExchange" />
    <host>
      <baseAddresses>
        <add baseAddress="net.tcp://localhost:8732/Design_Time_Addresses/digiPM.Shell.LogOutPMSEMRService/PMSEMRLogOutService/" />
      </baseAddresses>
    </host>
  </service>
</services>

<!--binding info - removed this for the sake of readability for this post -->

web.config on the service project:

<system.serviceModel>

<bindings>
  <wsHttpBinding>
      <binding name="WSHttpBinding_Services" closeTimeout="01:10:00" openTimeout="01:10:00" receiveTimeout="01:10:00" sendTimeout="01:10:00" bypassProxyOnLocal="false" 
               transactionFlow="false" hostNameComparisonMode="StrongWildcard" maxBufferPoolSize="524288" maxReceivedMessageSize="2147483647" 
               messageEncoding="Mtom" textEncoding="utf-8" useDefaultWebProxy="true" allowCookies="false">
          <readerQuotas maxDepth="4096" maxStringContentLength="2147483647" maxArrayLength="524288" maxBytesPerRead="524288" maxNameTableCharCount="524288" />
          <reliableSession ordered="true" inactivityTimeout="01:10:00" enabled="false" />

          <security mode="None">

          </security>
      </binding>
  </wsHttpBinding>
</bindings>

<behaviors>
  <serviceBehaviors>
    <behavior name="digiPM.Service.Behavior">
      <serviceMetadata httpGetEnabled="true" />
      <serviceDebug includeExceptionDetailInFaults="false" />
      <dataContractSerializer maxItemsInObjectGraph="2147483647" />
    </behavior>

  </serviceBehaviors>
  <endpointBehaviors>
    <behavior name="customObjectQuota">
      <dataContractSerializer maxItemsInObjectGraph="2147483646"/>
    </behavior>
  </endpointBehaviors>
</behaviors>

<services>
  <service behaviorConfiguration="digiPM.Service.Behavior"
    name="digiPM.Service.AddressCrudService">
    <endpoint address="" binding="wsHttpBinding" bindingConfiguration="WSHttpBinding_Services"
                name="AddressCrudServiceEndPoint" bindingNamespace="urn:Dawliasoft.Sculpture"  contract="digiPM.Services.Contracts.IAddressCrudService" behaviorConfiguration="customObjectQuota" />
    <endpoint address="mex" binding="mexHttpBinding" contract="IMetadataExchange"  behaviorConfiguration="customObjectQuota" />
  </service>

 <!--<more services defined with same configuration as above..>-->

  </services>


</system.serviceModel>

然而，这没有帮助 . 请注意，APP.CONFIG中引用的服务不是我遇到的服务问题 .

我也尝试了以下内容：

  • 将这些属性添加到服务实现：[DataContract（IsReference = true）]，[ServiceBehavior（AddressFilterMode = AddressFilterMode.Any，MaxItemsInObjectGraph = 2147483646）]

  • 编写了一个自定义DataContractSerializerOperationBehavior类，它设置了MaximumObjectsInGraph和IsReference行为 . 还添加了自定义属性以应用此服务实现 . 为了杂乱，我没有发布代码，但可以添加它，如果有人认为这将是有益的 .

思考？想法？我从哪里去？

提前致谢！

.net wcf datacontractserializer xmlserializer servicebehavior

5 回答

  • 14

    我刚刚意识到你的WPF配置文件不对 . 所以，我删除了所有评论，因为他们假设有效的WCF配置 . 您的WPF配置文件不正确...它需要说“客户端”而不是服务...您是否在Visual Studio中使用“添加服务引用”？如果是这样，它应该为您创建正确的配置文件 .

    否则，请参阅MSDN以获取WPF项目中客户端配置文件的正确格式 .

    回复于
  • 1

    配置以下值为我解决了问题 .

    客户端配置：

    <system.serviceModel>
<bindings>
<basicHttpBinding>
  <binding name="BasicHttpBinding_IManagementService" closeTimeout="00:01:00"
    openTimeout="00:01:00" receiveTimeout="00:10:00" sendTimeout="00:01:00"
    allowCookies="false" bypassProxyOnLocal="false" hostNameComparisonMode="StrongWildcard"
    maxBufferSize="2147483647" maxBufferPoolSize="524288" maxReceivedMessageSize="2147483647"
    messageEncoding="Text" textEncoding="utf-8" transferMode="Buffered"
    useDefaultWebProxy="true">
    <readerQuotas maxDepth="128" maxStringContentLength="2147483647"
      maxArrayLength="16384" maxBytesPerRead="4096" maxNameTableCharCount="16384" />
    <security mode="None">
      <transport clientCredentialType="None" proxyCredentialType="None"
        realm="" />
      <message clientCredentialType="UserName" algorithmSuite="Default" />
    </security>
  </binding>
</basicHttpBinding>
</bindings>
<client>
<endpoint address="http://XXXX/ManagementService.svc"
  binding="basicHttpBinding" bindingConfiguration="BasicHttpBinding_IManagementService"
  contract="ManagementServiceReference.IManagementService"
  name="BasicHttpBinding_IManagementService" behaviorConfiguration="ManagementServiceBehaviour"/>
</client>
<behaviors>
<endpointBehaviors>
  <behavior name="ManagementServiceBehaviour">
    <dataContractSerializer maxItemsInObjectGraph="2147483647"/>
  </behavior>
</endpointBehaviors>
</behaviors>

    服务器配置：

    <system.serviceModel>
<serviceHostingEnvironment multipleSiteBindingsEnabled="true" />
<behaviors>
<serviceBehaviors>
  <behavior name="ManagementServiceBehaviour">
    <serviceDebug includeExceptionDetailInFaults="true" />
    <serviceMetadata httpGetEnabled="true" />
    <dataContractSerializer ignoreExtensionDataObject="false" maxItemsInObjectGraph="2147483646" />
  </behavior>
  <behavior name="">
    <serviceMetadata httpGetEnabled="true" />
    <serviceDebug includeExceptionDetailInFaults="false" />
  </behavior>
</serviceBehaviors>
</behaviors>
<bindings>
<basicHttpBinding>
  <binding name="BasicHttpBinding" maxBufferSize="2147483647" maxReceivedMessageSize="2147483647" closeTimeout="01:50:00" openTimeout="01:50:00" sendTimeout="01:50:00" receiveTimeout="01:50:00" >
    <readerQuotas maxDepth="128" maxStringContentLength="8388608" maxArrayLength="16384" maxBytesPerRead="4096" maxNameTableCharCount="16384" />
  </binding>
</basicHttpBinding>
</bindings>

<services>
<service behaviorConfiguration="ManagementServiceBehaviour" name="BusinessLogic.Facade.EntityFacade.Services.ManagementService">
  <endpoint binding="basicHttpBinding" bindingConfiguration="BasicHttpBinding" contract="BusinessLogic.Facade.EntityFacade.Contracts.IManagementService">
    <identity>
      <dns value="" />
    </identity>
  </endpoint>
</service>
</services>
</system.serviceModel>
    回复于
  • 5

    您是否尝试过缓冲区和最大收到的邮件大小？

    maxBufferSize="6553600" maxBufferPoolSize="52428800" maxReceivedMessageSize="6553600"
    回复于
  • 4

    注意“dataContractSerializer”元素 . 在我的情况下，我得到了提到的错误，直到我把这个元素作为父元素“行为”的第一项 . 至少在客户端确实如此 .

    回复于
  • 0

    您将在查询中返回一个通用列表或大小超过65536的数组 . 使用select top 60000或不添加超过60k的元素将解决您的问题 .

    回复于

相关问题