我想做一个项目，其中数据保存在SD卡上，然后使用以太网屏蔽这些数据使用FTP客户端arduino发送到ftp服务器 . 服务器我有免费托管 .
这是ftptest的数据服务器：
Status: Resolving address of cba.pl
Status: Connecting to 95.211.144.68
Warning: The entered address does not resolve to an IPv6 address.
Status: Connected, waiting for welcome message...
Reply: 220---------- Welcome to Pure-FTPd [privsep] [TLS] ----------
Reply: 220-You are user number 57 of 200 allowed.
Reply: 220-Local time is now 16:30. Server port: 21.
Reply: 220-This is a private system - No anonymous login
Reply: 220-IPv6 connections are also welcome on this server.
Reply: 220 You will be disconnected after 5 minutes of inactivity.
Command: CLNT https://ftptest.net on behalf of 2a02:a311:c020:3200:c10d:18e1:36a5:8e2
Reply: 530 You aren't logged in
Command: AUTH TLS
Reply: 234 AUTH TLS OK.
Status: Performing TLS handshake...
Status: TLS handshake successful, verifying certificate...
Status: Received 2 certificates from server.
Status: cert[0]: subject='CN=www.cba.pl' issuer='C=US,O=Let\27s Encrypt,CN=Let\27s Encrypt Authority X3'
Status: cert[1]: subject='C=US,O=Let\27s Encrypt,CN=Let\27s Encrypt Authority X3' issuer='O=Digital Signature Trust Co.,CN=DST Root CA X3'
Command: USER wsalkowski
Reply: 331 User wsalkowski OK. Password required
Command: PASS ********
Reply: 230-Your bandwidth usage is restricted
Reply: 230-OK. Current restricted directory is /
Reply: 230 Max allowed filesize is 10485760 bytes
Command: SYST
Reply: 215 UNIX Type: L8
Command: FEAT
Reply: 211-Extensions supported:
Reply: EPRT
Reply: IDLE
Reply: MDTM
Reply: SIZE
Reply: MFMT
Reply: REST STREAM
Reply: MLST type*;size*;sizd*;modify*;UNIX.mode*;UNIX.uid*;UNIX.gid*;unique*;
Reply: MLSD
Reply: AUTH TLS
Reply: PBSZ
Reply: PROT
Reply: UTF8
Reply: TVFS
Reply: ESTA
Reply: PASV
Reply: EPSV
Reply: SPSV
Reply: ESTP
Reply: 211 End.
Command: PBSZ 0
Reply: 200 PBSZ=0
Command: PROT P
Reply: 200 Data protection level set to "private"
Command: PWD
Reply: 257 "/" is your current location
Status: Current path is /
Command: TYPE I
Reply: 200 TYPE is now 8-bit binary
Command: PASV
Reply: 227 Entering Passive Mode (95,211,144,68,218,36)
Command: MLSD
Status: Data connection established, performing TLS handshake...
Reply: 150 Accepted data connection
Status: TLS handshake successful, verifying certificate...
Status: Received 2 certificates from server.
Status: cert[0]: subject='CN=www.cba.pl' issuer='C=US,O=Let\27s Encrypt,CN=Let\27s Encrypt Authority X3'
Status: cert[1]: subject='C=US,O=Let\27s Encrypt,CN=Let\27s Encrypt Authority X3' issuer='O=Digital Signature Trust Co.,CN=DST Root CA X3'
Status: TLS session of transfer connection has been resumed.
Listing: type=cdir;sizd=4096;modify=20160501192730;UNIX.mode=0755;UNIX.uid=0;UNIX.gid=0;unique=803g16f353ca; .
Listing: type=pdir;sizd=4096;modify=20160501192730;UNIX.mode=0755;UNIX.uid=0;UNIX.gid=0;unique=803g16f353ca; ..
Listing: type=dir;sizd=4096;modify=20161031125022;UNIX.mode=0700;UNIX.uid=1098695;UNIX.gid=33;unique=803g2259f68; wsalkowski.cba.pl
Reply: 226-Options: -a -l
Reply: 226 3 matches total
Status: Success
Results
Your server is working and assorted routers/firewalls have been correctly configured for explicit FTP over TLS as performed by this test. However there have been warnings about compatibility issues, not all users will be able to use your server.
For maximum compatibility, consider resolving these warnings.
这里是串行监视器arduino ide的结果
Ready. Press f or r
kkksdsSD opened
Command connected
220---------- Welcome to Pure-FTPd [privsep] [TLS] ----------
220-You are user number 52 of 200 allowed.
220-Local time is now 15:32. Server port: 21.
220-This is a private system - No anonymous login
220-IPv6 connections are also welcome on this server.
220 You will be disconnected after 5 minutes of inactivity.
331 User wsalkowski OK. Password required
230-Your bandwidth usage is restricted
230-OK. Current restricted directory is /
230 Max allowed filesize is 10485760 bytes
215 UNIX Type: L8
227 Entering Passive Mode (95,211,144,65,208,115)
Data port: 53363
Data connected
553 Can't open that file: No such file or directory
221-Goodbye. You uploaded 0 and downloaded 0 kbytes.
221 Logout.
Command disconnected
SD closed
FTP FAIL
SD opened
Command connected
220---------- Welcome to Pure-FTPd [privsep] [TLS] ----------
220-You are user number 53 of 200 allowed.
220-Local time is now 15:32. Server port: 21.
220-This is a private system - No anonymous login
220-IPv6 connections are also welcome on this server.
220 You will be disconnected after 5 minutes of inactivity.
331 User wsalkowski OK. Password required
230-Your bandwidth usage is restricted
230-OK. Current restricted directory is /
230 Max allowed filesize is 10485760 bytes
215 UNIX Type: L8
227 Entering Passive Mode (95,211,144,65,208,248)
Data port: 53496
Data connected
553 Can't open that file: No such file or directory
221-Goodbye. You uploaded 0 and downloaded 0 kbytes.
221 Logout.
Command disconnected
SD closed
FTP FAIL
这里代码arduino（我的代码来自http://playground.arduino.cc/Code/FTP）
/*
FTP passive client for IDE v1.0.1 and w5100/w5200
Posted October 2012 by SurferTim
Modified 6 June 2015 by SurferTim
*/
#include
#include
#include
// comment out next line to write to SD from FTP server
#define FTPWRITE
// this must be unique
byte mac[] = { 0x90, 0xA2, 0xDA, 0x00, 0x59, 0x67 } ;
// change to your network settings
IPAddress ip( 192, 168, 0, 25 );
IPAddress gateway( 192, 168, 0, 1 );
IPAddress subnet( 255, 255, 255, 0 );
// change to your server
IPAddress server( 95, 211, 144, 65);
EthernetClient client;
EthernetClient dclient;
char outBuf[128];
char outCount;
// change fileName to your file (8.3 format!)
char fileName[13] = "POMIARY.txt";
void setup()
{
Serial.begin(9600);
digitalWrite(10,HIGH);
if(SD.begin(4) == 0)
{
Serial.println(F("SD init fail"));
}
Ethernet.begin(mac, ip, gateway, gateway, subnet);
digitalWrite(10,HIGH);
delay(2000);
Serial.println(F("Ready. Press f or r"));
}
void loop()
{
byte inChar;
inChar = Serial.read();
if(inChar == 'f')
{
if(doFTP()) Serial.println(F("FTP OK"));
else Serial.println(F("FTP FAIL"));
}
if(inChar == 'r')
{
readSD();
}
}
File fh;
byte doFTP()
{
#ifdef FTPWRITE
fh = SD.open(fileName,FILE_READ);
#else
SD.remove(fileName);
fh = SD.open(fileName,FILE_WRITE);
#endif
if(!fh)
{
Serial.println(F("SD open fail"));
return 0;
}
#ifndef FTPWRITE
if(!fh.seek(0))
{
Serial.println(F("Rewind fail"));
fh.close();
return 0;
}
#endif
Serial.println(F("SD opened"));
if (client.connect(server,21)) {
Serial.println(F("Command connected"));
}
else {
fh.close();
Serial.println(F("Command connection failed"));
return 0;
}
if(!eRcv()) return 0;
// Change to your user and password
client.write("USER wsalkowski\r\n");
if(!eRcv()) return 0;
client.write("PASS pass\r\n");
if(!eRcv()) return 0;
client.write("SYST\r\n");
if(!eRcv()) return 0;
client.write("PASV\r\n");
if(!eRcv()) return 0;
char *tStr = strtok(outBuf,"(,");
int array_pasv[6];
for ( int i = 0; i 63)
{
dclient.write(clientBuf,64);
clientCount = 0;
}
}
if(clientCount > 0) dclient.write(clientBuf,clientCount);
#else
while(dclient.connected())
{
while(dclient.available())
{
char c = dclient.read();
fh.write(c);
Serial.write(c);
}
}
#endif
dclient.stop();
Serial.println(F("Data disconnected"));
if(!eRcv()) return 0;
client.println(F("QUIT"));
if(!eRcv()) return 0;
client.stop();
Serial.println(F("Command disconnected"));
fh.close();
Serial.println(F("SD closed"));
return 1;
}
byte eRcv()
{
byte respCode;
byte thisByte;
while(!client.available()) delay(1);
respCode = client.peek();
outCount = 0;
while(client.available())
{
thisByte = client.read();
Serial.write(thisByte);
if(outCount = '4')
{
efail();
return 0;
}
return 1;
}
void efail()
{
byte thisByte = 0;
client.println(F("QUIT"));
while(!client.available()) delay(1);
while(client.available())
{
thisByte = client.read();
Serial.write(thisByte);
}
client.stop();
Serial.println(F("Command disconnected"));
fh.close();
Serial.println(F("SD closed"));
}
void readSD()
{
fh = SD.open(fileName,FILE_READ);
if(!fh)
{
Serial.println(F("SD open fail"));
return;
}
while(fh.available())
{
Serial.write(fh.read());
}
fh.close();
}
如果有人告诉我什么可以去，我做错了什么？
我可以使用filezilla抛出文件，但只能到文件夹wsalkowski.cba.pl
问题是否缺少从ftp客户端arduino访问路径/wsalkowski.cba.pl？也就是说，带有默认SD卡的文件被抛到根文件夹/，它没有权限chmod？
请帮助我，对不起我的英语
1 回答
让我们尝试更改您的FTP服务器 . 如果您登录FTP，它可能是服务器中的问题 .