我有一个Beaglebone Black（在Debian上运行），我通过usb连接到我的笔记本电脑（在Arch Linux上运行） . 笔记本电脑能够读取Beaglebone作为存储设备 . 但是，我无法通过浏览器/ ssh连接到Beaglebone，访问以下ip-192.168.7.2 . ifconfig -a 给出以下输出 -
enp0s20u2: flags=4098<BROADCAST,MULTICAST> mtu 1500
ether 54:4a:16:c1:f1:53 txqueuelen 1000 (Ethernet)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 0 bytes 0 (0.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
enp1s0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 192.168.3.204 netmask 255.255.255.0 broadcast 192.168.3.255
inet6 fe80::2ad2:44ff:fe8e:bd61 prefixlen 64 scopeid 0x20<link>
ether 28:d2:44:8e:bd:61 txqueuelen 1000 (Ethernet)
RX packets 40024 bytes 35440467 (33.7 MiB)
RX errors 0 dropped 30 overruns 0 frame 0
TX packets 17546 bytes 2112866 (2.0 MiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536
inet 127.0.0.1 netmask 255.0.0.0
inet6 ::1 prefixlen 128 scopeid 0x10<host>
loop txqueuelen 0 (Local Loopback)
RX packets 2137 bytes 479657 (468.4 KiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 2137 bytes 479657 (468.4 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
wlp2s0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 10.10.5.86 netmask 255.255.252.0 broadcast 10.10.7.255
ether b8:ee:65:ac:7c:65 txqueuelen 1000 (Ethernet)
RX packets 19264 bytes 18721516 (17.8 MiB)
RX errors 0 dropped 4 overruns 0 frame 0
TX packets 17238 bytes 2273813 (2.1 MiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
enp0s20u2 是Beaglebone的界面，没有ip分配给它（根据文档，它的ip应该是192.168.7.2），因此我无法ssh或浏览它 .
1 回答
最后在笔记本电脑上运行以下命令：
现在，我可以ssh /浏览Beaglebone Black .