...缩进错误：unindent与任何外部缩进级别都不匹配“

这是我的代码....我不知道我的代码错了....识别行161的错误...像这样的错误....行161 ....缩进错误：unindent不匹配任何外部缩进级别“

帮助帮助

import sys
import RPi.GPIO as GPIO
import os
import Adafruit_DHT
import urllib2
import smbus
import time
from ctypes import c_short

#Register Address
regCall   = 0xAA
regMean   = 0xF4
regMSB    = 0xF6
regLSB    = 0xF7
regPres   = 0x34
regTemp   = 0x2e

DEBUG = 1
sample = 2
deviceAdd =0x77

humi=""
temp=""

#bus = smbus.SMBus(0)  #for Pi1 uses 0
I2cbus = smbus.SMBus(1) # for Pi2 uses 1

DHTpin = 17

key="30BCDSRQ52AOI3UA"       # Enter your Write API key from ThingSpeak

GPIO.setmode(GPIO.BCM)
# Define GPIO to LCD mapping
LCD_RS = 18
LCD_EN  = 23
LCD_D4 = 24
LCD_D5 = 16
LCD_D6 = 20
LCD_D7 = 21

GPIO.setwarnings(False)
GPIO.setmode(GPIO.BCM)     
GPIO.setup(LCD_E, GPIO.OUT)  
GPIO.setup(LCD_RS, GPIO.OUT) 
GPIO.setup(LCD_D4, GPIO.OUT) 
GPIO.setup(LCD_D5, GPIO.OUT) 
GPIO.setup(LCD_D6, GPIO.OUT) 
GPIO.setup(LCD_D7, GPIO.OUT) 

def convert1(data, i):   # signed 16-bit value
  return c_short((data[i]<< 8) + data[i + 1]).value

def convert2(data, i):   # unsigned 16-bit value
  return (data[i]<< 8) + data[i+1] 

def readBmp180(addr=deviceAdd):    
  value = bus.read_i2c_block_data(addr, regCall, 22)  # Read calibration data

  # Convert byte data to word values
  AC1 = convert1(value, 0)
  AC2 = convert1(value, 2)
  AC3 = convert1(value, 4)
  AC4 = convert2(value, 6)
  AC5 = convert2(value, 8)
  AC6 = convert2(value, 10)
  B1  = convert1(value, 12)
  B2  = convert1(value, 14)
  MB  = convert1(value, 16)
  MC  = convert1(value, 18)
  MD  = convert1(value, 20)

    # Read temperature
  bus.write_byte_data(addr, regMean, regTemp)
  time.sleep(0.005)
  (msb, lsb) = bus.read_i2c_block_data(addr, regMSB, 2)
  P2 = (msb << 8) + lsb

  # Read pressure
  bus.write_byte_data(addr, regMean, regPres + (sample << 6))
  time.sleep(0.05)
  (msb, lsb, xsb) = bus.read_i2c_block_data(addr, regMSB, 3)
  P1 = ((msb << 16) + (lsb << 8) + xsb) >> (8 - sample)

   # Refine temperature
  X1 = ((P2 - AC6) * AC5) >> 15
  X2 = (MC << 11) / (X1 + MD)
  B5 = X1 + X2
  temperature = (B5 + 8) >> 4

  # Refine pressure
  B6  = B5 - 4000
  B62 = B6 * B6 >> 12
  X1  = (B2 * B62) >> 11
  X2  = AC2 * B6 >> 11
  X3  = X1 + X2
  B3  = (((AC1 * 4 + X3) << sample) + 2) >> 2

  X1 = AC3 * B6 >> 13
  X2 = (B1 * B62) >> 16
  X3 = ((X1 + X2) + 2) >> 2
  B4 = (AC4 * (X3 + 32768)) >> 15
  B7 = (P1 - B3) * (50000 >> sample)

  P = (B7 * 2) / B4

  X1 = (P >> 8) * (P >> 8)
  X1 = (X1 * 3038) >> 16
  X2 = (-7357 * P) >> 16
  pressure = P + ((X1 + X2 + 3791) >> 4)

  return (str(pressure/100.0))

def readDHT():
    humi, temp = Adafruit_DHT.read_retry(Adafruit_DHT.DHT11, DHTpin)
    return (str(int(humi)), str(int(temp)))

def lcd_init():
  lcdcmd(0x33) 
  lcdcmd(0x32) 
  lcdcmd(0x06)
  lcdcmd(0x0C) 
  lcdcmd(0x28) 
  lcdcmd(0x01) 
  time.sleep(0.0005)

def lcdcmd(ch): 
  GPIO.output(RS, 0)
  GPIO.output(D4, 0)
  GPIO.output(D5, 0)
  GPIO.output(D6, 0)
  GPIO.output(D7, 0)
  if ch&0x10==0x10:
    GPIO.output(D4, 1)
  if ch&0x20==0x20:
    GPIO.output(D5, 1)
  if ch&0x40==0x40:
    GPIO.output(D6, 1)
  if ch&0x80==0x80:
    GPIO.output(D7, 1)
  GPIO.output(EN, 1)
  time.sleep(0.0005)
  GPIO.output(EN, 0)

  # Low bits
  GPIO.output(D4, 0)
  GPIO.output(D5, 0)
  GPIO.output(D6, 0)
  GPIO.output(D7, 0)
  if ch&0x01==0x01:
    GPIO.output(LCD_D4, 1)
  if ch&0x02==0x02:
    GPIO.output(LCD_D5, 1)
  if ch&0x04==0x04:
    GPIO.output(LCD_D6, 1)
  if ch&0x08==0x08:
    GPIO.output(LCD_D7, 1)
  GPIO.output(EN, 1)
  time.sleep(0.0005)
  GPIO.output(EN, 0)

 def lcddata(ch): 
  GPIO.output(RS, 1)
  GPIO.output(D4, 0)
  GPIO.output(D5, 0)
  GPIO.output(D6, 0)
  GPIO.output(D7, 0)
  if ch&0x10==0x10:
    GPIO.output(D4, 1)
  if ch&0x20==0x20:
    GPIO.output(D5, 1)
  if ch&0x40==0x40:
    GPIO.output(D6, 1)
  if ch&0x80==0x80:
    GPIO.output(D7, 1)
  GPIO.output(EN, 1)
  time.sleep(0.0005)
  GPIO.output(EN, 0)

  # Low bits
  GPIO.output(D4, 0)
  GPIO.output(D5, 0)
  GPIO.output(D6, 0)
  GPIO.output(D7, 0)
  if ch&0x01==0x01:
    GPIO.output(LCD_D4, 1)
  if ch&0x02==0x02:
    GPIO.output(LCD_D5, 1)
  if ch&0x04==0x04:
    GPIO.output(LCD_D6, 1)
  if ch&0x08==0x08:
    GPIO.output(LCD_D7, 1)
  GPIO.output(EN, 1)
  time.sleep(0.0005)
  GPIO.output(EN, 0)

def lcdstring(Str):
  l=0;
  l=len(Str)
  for i in range(l):
    lcddata(ord(message[i]))

lcd_init()
 lcdcmd(0x01)
lcdstring("Circuit Digest")
lcdcmd(0xc0)
lcdstring("Welcomes you")
time.sleep(3) # 3 second delay

# main() function
def main():

    print 'System Ready...'
    URL = 'https://api.thingspeak.com/update?api_key=%s' % key
    print "Wait...."
    while True:
            (humi, temp)= readDHT()
            (pressure) =readBmp180()

            lcdcmd(0x01)
            lcdstring("Humi#Temp#P(hPa)")
            lcdstring(humi+'%'+"  %sC  %s" %(temp, pressure))
            finalURL = URL +"&field1=%s&field2=%s"%(humi, temp)+"&field3=%s" %(pressure) 
            print finalURL
            s=urllib2.urlopen(finalURL);
            print  humi+ " " + temp + " " + pressure
            s.close()
            time.sleep(10)



if __name__=="__main__":
   main()