从真实模式切换到保护模式后跳远

根据这个tutorial，创建一个简单的操作系统就足够了，切换到保护模式就像下面的代码一样简单，而不需要其他众所周知的操作，例如启用A20 ......

无论如何，我是这个领域的新手，我写了下面的代码，因为他们提到的修改完全来自于这个SO的修改 .

Code Structure: 这个简单的操作系统应简要加载如下：

• 加载/读取15个扇区

• 启用GDT

• 切换到保护模式（并打印"Successfully landed in 32-bit Protected Mode"） .

• 加载内核并打印"X"

但是，模拟器仍在重新启动 . 请查看随附的整个代码 .

bootloader.asm

[bits 16]
[org 0x7C00]

KERNEL_OFFSET equ 0x1000

xor ax, ax
mov ds, ax
mov es, ax
mov [BOOT_DRIVE], dl
mov ax, 0x07E0                  ; End of stack
cli
mov ss, ax
mov sp, 0x1200                  ; Size of Stack. By this, we assume that stack starts at 9000h
                            ; of size 1200h and ends at 7E00h to avoid being overwritten.
sti

call    load_kernel
call    switch_to_pm

jmp $

%include "src/functions/disk_load.asm"

load_kernel:
    mov bx, KERNEL_OFFSET   
    mov dh, 15
    mov dl, [BOOT_DRIVE]
    call    disk_load

    ret

; Global variables
BOOT_DRIVE  db 0
SECTORS     db 0
MSG_PROT_MODE   db "Successfully landed in 32-bit Protected Mode" , 0

%include "src/functions/gdt.asm"
%include "src/functions/switch_to_pm.asm"

[ bits 32]
; This is where we arrive after switching to and initialising protected mode.
BEGIN_PM:
    mov ebx , MSG_PROT_MODE
    call    print_string_pm     ; Use our 32 - bit print routine.


    ;call   KERNEL_OFFSET       ; Now jump to the address of our loaded
                    ; kernel code , assume the brace position ,
                    ; and cross your fingers. Here we go !

    jmp $           ; Hang.

%include "src/functions/writing_video_mode.asm"

; Bootsector padding
times 510-($-$$) db 0
dw 0xAA55

; 15 sector padding
times 15*256 dw 0xDADA

disk_load.asm

disk_load:
    mov [SECTORS], dh
    mov ch, 0x00            ;C=0
    mov dh, 0x00            ;H=0
    mov cl, 0x02            ;S=2

next_group:
    mov di, 5                ;Max 5 tries

again: 
    mov ah, 0x02            ;Read sectors
    mov al, [SECTORS]
    int 0x13
    jc   maybe_retry
    sub [SECTORS], al ;Remaining sectors
    jz  ready
    mov cl, 0x01            ;Always sector 1
    xor dh, 1                ;Next head on diskette!
    jnz next_group
    inc ch                      ;Next cylinder
    jmp next_group

maybe_retry:
    mov ah, 0x00            ;Reset diskdrive
    int 0x13
    dec di
    jnz again
    jmp disk_error

ready:
    ret

disk_error:
    mov ah, 0x0e
    mov al, 'Y'
    int 0x10
    jmp $

DISK_ERROR_MSG db "Disk read error!", 0

gdt.asm

gdt_start:

    gdt_null:
        dd 0x0 ; ’ dd ’ means define double word ( i.e. 4 bytes )
        dd 0x0

    gdt_code:
        dw 0xffff
        dw 0x0
        db 0x0
        db 10011010b ; 1 st flags , type flags
        db 11001111b ; 2 nd flags , Limit ( bits 16 -19)
        db 0x0

    gdt_data:
        dw 0xffff
        dw 0x0
        db 0x0
        db 10010010b ; 1 st flags , type flags
        db 11001111b ; 2 nd flags , Limit ( bits 16 -19)
        db 0x0

    gdt_end:

    gdt_descriptor:
        dw gdt_end - gdt_start - 1
        dd gdt_start

CODE_SEG equ gdt_code - gdt_start
DATA_SEG equ gdt_data - gdt_start

switch_to_pm.asm

[ bits 16 ]

switch_to_pm:
    cli
    lgdt [ gdt_descriptor ]
    mov eax , cr0
    or eax , 0x1
    mov cr0 , eax
    jmp CODE_SEG:init_pm

[ bits 32 ]

init_pm:
    mov ax, DATA_SEG
    mov ds, ax
    mov ss, ax
    mov es, ax
    mov fs, ax
    mov gs, ax
    mov ebp , 0x90000
    mov esp , ebp
    call BEGIN_PM

并且为了确保我们落入保护模式：

writing_video_mode.asm

[ bits 32]

VIDEO_MEMORY equ 0xb8000
WHITE_ON_BLACK equ 0x0f

print_string_pm:
    push eax
    push ebx
    push edx
    mov edx , VIDEO_MEMORY ; Set edx to the start of vid mem.

    print_string_pm_loop:
        mov al, [ebx]
        mov ah, WHITE_ON_BLACK
        cmp al, 0
        je print_string_pm_done
        mov [edx], ax
        add ebx, 1
        add edx, 2
        jmp print_string_pm_loop

    print_string_pm_done:
        pop edx 
        pop ebx 
        pop eax 
        ret

kernel.c

void main () {
    char * video_memory = (char *) 0xb8000;
    *video_memory = 'X';
}

顺便说一下，我正在使用这个 Makefile ：

all: bootloader.bin kernel.bin

bootloader.bin: src/bootloader.asm
    nasm src/bootloader.asm -f bin -o output/bootloader.bin

kernel.o: src/kernel/kernel.c
    gcc -ffreestanding -c src/kernel/kernel.c -o output/kernel.o -m32

kernel.bin: kernel.o
    ld -o output/kernel.bin -Ttext 0x1000 --oformat binary output/kernel.o -melf_i386

clean:
    rm -f output/*.* output/*

并且为了将其移动到闪存中，我使用以下命令：

cat output/bootloader.bin output/kernel.bin > os-image
sudo dd if=os-image of=/dev/sdb bs=512 conv=notrunc && sync

为了运行它，我使用qemu与此命令：

qemu-system-i386 -hda /dev/sdb

注意到/ dev / sdb是我的闪存驱动器 .

Problem: 实际上，只有在 bootloader.asm 中禁用/注释 call KERNEL_OFFSET 时，代码才会进入受保护模式（即打印"Successfully landed in 32-bit Protected Mode"） . 但是，启用此行时，它将开始启动并重新启动 .

我希望我已经提供了所有必要的信息 . 对我来说，远程跳跃不应该这样做 . 任何评论表示赞赏 .